{"product_id":"14-galvanized-vent-with-flat-galvanized-lid","title":"14″ Galvanized Vent with Flat Galvanized Lid","description":"\u003cp\u003eMade of unpainted galvanized steel, this 14″x14″ roof vent is the closest available replacement for old aluminum Hehr vents. The hinged lid cranks open on one side with a knob inside. It has a flat low-profile top, radiused corners and a removable screen.\u003c\/p\u003e \u003cp\u003eThe interior off-white plastic garnish trims out the interior and is included. It fits roofs 1-7\/8″ to 3″ thick, but can be trimmed for thinner roofs.\u003c\/p\u003e \u003cp\u003ePlease note: This is a complete vent unit and must be installed in your trailer roof’s 14″x14″ rough opening. To install it, you will need to remove your existing vent unit entirely.\u003c\/p\u003e \u003cp\u003eInstallation instructions:\u003c\/p\u003e \u003col\u003e \u003cli\u003eIf replacing an existing unit, remove interior trim first. Then remove old vent assembly from rough opening in roof.\u003c\/li\u003e \u003cli\u003eClean rough opening and ensure that it is approximately 14.5″ x 14.5″.\u003c\/li\u003e \u003cli\u003ePlace putty tape or polyurethane sealant around bottom edge of roof mounting flange. Orient the vent so that the hinge is towards the vehicle front and insert vent into the opening with the screen frame extended through the roof cavity.\u003c\/li\u003e \u003cli\u003eSecure the vent to the roof with #8 screws of sufficient length through the mounting holes in the flange.\u003c\/li\u003e \u003cli\u003ePlace the ceiling garnish into the groove around the screen frame. Drive #8 screws through the mounting holes and tighten to ceiling. Be careful not to over tighten and distort the garnish.\u003c\/li\u003e \u003c\/ol\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eAttention: Please expect some minor tooling marks and scratches to the top of lid incurred during transit. These will not be apparent once vent is installed. The perforated mounting flange may also bend in transit because the flange is a soft pliable steel. When it arrives, you may need to bend the corners back flat with a pair of pliers or soft mallet before installing.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eDescription Above Price\u003c\/td\u003e \u003ctd\u003e\u003cstrong\u003eWe include the interior\u003cbr\u003egarnish free of charge! \u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"Trailer Parts Mart","offers":[{"title":"Default Title","offer_id":52963214622936,"sku":"VTS-280","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/0898\/9144\/files\/01_VTS-280-3__39347__86114_0118e3825058.webp?v=1794459985","url":"https:\/\/trailerproparts.com\/products\/14-galvanized-vent-with-flat-galvanized-lid","provider":"Trailer Parts Mart","version":"1.0","type":"link"}